BioConnect©
- Optimized recess contour (patent approved)
- Highest press-on power at the transitions to wetted areas prevents dirt and germs getting into the sealing space (see ASME-BPE, Ch. SD-3.7.2 and 3.7.6)
- Defined expansion pockets excludes dangerous "escalator effect" between wetted area and elastomer seat (see ASME-BPE, Ch. SD-3.7.2)
- Self-draining even after expansion of seal due to high temperature (see ASME-BPE, Ch. SD-3.7.7)
- Metal-to-metal-stop avoids stress or overcompression of gaskets (O-ring) (see ASME-BPE, Ch. SD-3.7.8)
- nominal pressure PN16 (D6 - DN100, 1/2" - 4")
Connect S© - a unique solution without elastomer gasket
- Optimal recess contour and design of the sealing metallic surface (patent approved)
- Excellent cleanability
- Tested by Fraunhofer-Institut for Grenzflächen-und Bioverfahrenstechnik
- Hermetic tightness even under repeated temperature changes
- Defined pre-stressing on the metallic sealing surface
- No gasket - no elevator effect
- Protection of the sealing contour against damage
- Axial positioning by metal-to-metal-stop
- Exact positioning by central guidance
- Material grad 1.4435/316 L; other grades on request
- Wetted areas with roughness Ra<0,8µm (Ra<0,5µm on demand)
- Dimensions acc. ASME-BPE, DIN11866, DIN 11850, ISO 1127
- Material Test Report according EN 10204-3.1 (on request ADW 2)
- Approval for pressure application: issued by TÜV Germany (Süddeutschland)
a) Nominal Pressure:
PN 16 (DN 6 until DN 50)
PN 10 (DN 65 until DN 100)
PN 100 (DN 6 until DN 40, high pressure-aseptic connection)
BioControl©
BioControl© is a fully aseptic modular system with TÜV-approval for pressure application.
BioControl© provides the user with a fully hygienic port for connection control instruments, gauges, sight glasses etc., allowing cleaning and sterilizing in place.
BioControl© system is supported by the following manufacturers of instruments and special equipment:
- Endress + Hauser
- WIKA
- LABOM
- Fisher Rosemount (EMERSON)
- Papenmeier
- Others
BioControl© allows 100% Cleaning-In-Place where typical instrument tees stay with uncleaned dead pockets.
Example: Inline - Housing
Example: Angle - Housing
|