Tygon S3™ B-44-4X IB Food & Beverage Dispensing Pressure Tubing (Formerly "Pressure Tubing")

Reinforced for elevated working pressure, Tygon S3™ B-44-4X IB Pressure Tubing is the most flexible of the reinforced tubings available today.

FORMULATION B-44-4X IB

Tygon S3™ B-44-4X IB Food & Beverage Dispensing Pressure Tubing can be used to transport many types of fluids in applications ranging from those regulated by FDA guidelines to industrial laboratory applications involving virtually all non-solvent based chemicals.

Lightweight and easy to handle, Tygon S3™ B-44-4X IB Tubing goes into service quickly. It readily curves around corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel, glass tubing or piping.

Tygon S3™ B-44-4X IB Food & Beverage Dispensing Pressure Tubing smooths non-porous inner bore resists particle entrapment and resultant bacterial growth. Its excellent non-wetting properties facilitate complete drainage and increase the overall effectiveness of cleaning, making it the ideal choice in food, beverage, dairy, and other bacterialsensitive applications. Custom antimicrobial version available upon request.

View the Tygon S3™ B-44-4X IB Food & Beverage Dispensing Pressure Tubing data sheet with complete size chart.

 


Features/Benefits
  • Handles four times the pressure of non-reinforced tubing
  • Smooth, non-porous bore resists particle entrapment
  • Clear wall enables visualization of fluid flow
  • Connects easily to ReSeal® Sanitary Fittings
  • Meets 3-A and NSF 51 and 61 criteria
  • Contains no chemicals listed in California' Prop 65
  • Contains no BPA
  • Phthalates-free
Typical Applications
  • Cosmetic Production
  • Food and Dairy Processing
  • Beverage Dispensing
  • Pharmaceutical Filling
  • Water Purification Systems
  • Printing Equipment
  • Coolant Lines
  • Chemical Transfer
  • Instrumentation and Air Supply
Typical Physical Properties
PropertyASTM Method Value or Rating
Durometer Hardness - Shore A, 15 sec D2240 66
Tensile Strength - psi (MPa) D412 2,200 (15.2)
Ultimate Elongation, % D412 390
Tear Resistance - lb-f/inch (kN/m) D1004
250 (43.8)
Specific Gravity D792 1.21
Water Absorption, % - 24 hours @ 23-°C D570 0.22
Compression Set Constant Deflection, % - @ 158-°F (70-°C) for 22 hours D395 - Method B 59
Brittleness by Impact Temp - T-°F (-°C) D746 -32 (-36)
Max Recommended Operating Temp - °F (-°C)
- 165 (74)
Tensile Stress,@ 200% Elongation, psi (MPa) - 1,379 (9.5)
Tensile Set, % D412 57
Color - Clear

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

For complete compliance information and appropriate use instructions, please refer to the detailed document of compliance. The complete compliance information and use instructions can be found at http://www.TygonS3Tubing.com.