Instrument Tees

MaxPure fittings are manufactured in accordance to ASME BPE specifications. In addition to heat numbers being permanently etched, a manufacturing job number is also etched onto each fitting. Using this job number, certifications can be obtained online. MaxPure fittings ensure total traceability for consistent, high quality product manufactured specifically for the pharmaceutical and high purity markets.

Features and Benefits:
  • All fittings are fabricated in T316L Stainless Steel for superior corrosion resistance and low carbon precipitation of welds.
  • BioPharm Clamp Fittings are offered in sizes 1/2" - 6"
  • BioPharm Clamp Fittings meet ASME BPE Specifications
Finish:

20 Ra ID and 32 Ra OD is standard. Other surface finishes with or without electropolish are available.

Packaging:

All Bio-Pharm fittings are furnished capped and bagged. Each open port is capped and fittings are individually sealed in a plastic bag. A label on each bag shows part number, material type, size and Ra finish.

 

TE7IWWCS - INSTRUMENT TEE
Nominal Size in.
Dimensions
Ordering Code
A in.
A mm
B in.
B mm
1/2 x 1
2.250
57.15
0.875
22.2
TE7IWWCS6L.5x1.0-..
3/4 x 1
2.250
57.15
1.000
25.4
TE7IWWCS6L.75x1.0-..
1/2 x 1 1/2
2.500
63.5
0.875
22.2
TE7IWWCS6L.5x1.5-..
3/4 x 1 1/2
2.500
63.5
1.000
25.4
TE7IWWCS6L.5-2.0-..
1 x 1 1/2
2.500
63.5
1.000
25.4
TE7IWWCS6L.5x2.0-..
3/4 x 2
2.750
69.9
1.125
28.6
TE7IWWCS6L.75x2.0-..
1 x 2
2.750
69.9
1.250
31.8
TE7IWWCS6L1.0x2.0-..
1 1/2 x 2
2.750
69.9
1.500
38.1
TE7IWWCS6L1.5x2.0-..

 

TEG7IS - INSTRUMENT TEE
Nominal Size in.
 Dimensions
Ordering Code
A in.
A mm
B in.
B mm
1/2 x 1 1/2
3.000
76.2
0.875
22.2
TEG7IS6L.5-1.5-..
3/4 x 1 1/2
3.000
76.2
1.000
25.4
TEG7IS6L.75-1.5-..
* 1 x 1 1/2
3.000
76.2
1.125
28.6
TEG7IS6L1.0-1.5-..
1/2 x 2
3.250
82.6
1.000
25.4
TEG7IS6L.5-2.0-..
3/4 x 2
3.250
82.6
1.125
28.6
TEG7IS6L.75-2.0-..
* 1 x 2
3.250
82.6
1.250
31.8
TEG7IS6L1.0-2.0-..
1 1/2 x 2
3.250
82.6
1.500
38.1
TEG7IS6L1.5-2.0-..
* Note: 1” Clamp Ferrule can also be orderd with “Type A” connections according to the ASME BPE standard.