APHP: High Pressure Unreinforced Silicone Tubing



Animal Derived Ingredient Free

High Pressure Tubing brochure PDF
Translucent, Platinum-Cured

AdvantaSil® High Pressure silicone tubing is a high quality, cost effective solution designed for increased flow rates to reduce your processing time. AdvantaSil High Pressure is the optimal choice for Single-Use applications such as TFF, virus filtration, inline integrity testing of filtration assemblies, and high volume fluid transfer.

AdvantaSil High Pressure tubing has undergone extensive physical, chemical and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9 and other standards. Full BPOG standardized extractables test protocol (six extraction solvents, tested to four different exposure times, out to 70 days) has been performed by a fully-accredited, third-party test lab.

AdvantaSil High Pressure tubing is not intended for implantation or continuous steam applications.

Key Features:
  • Allows for processing at higher flow rates
  • Full vacuum capabilities on most sizes
  • Flexible and translucent yet durable
  • Eliminates particulate shedding that can occur when cutting braid reinforced hose
  • Certified free of animal-derived ingredients
  • General temperature range: -65°F (-53.9°C) to 400°F (204.4°C)
  • Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture and environmental exposure
  • Sterilizable by autoclave or gamma radiation
  • Available with validated sterility assurance of 10-6 via gamma irradiation per ISO 11137 method VDmax 25
  • Documented lot traceable with identification on bags
  • Documented quality control per ISO 9001:2015
  • Complete validation package available upon request
  • Now available as mini and standard Tri-Clamp® ends — call for details!

Full BPOG standardized extractables test results available on request

 

 

APHP - HIGH PRESSURE SILICONE TUBING Dimensional Specifications
Product
Number
Nominal
I.D.
Wall O.D. Bend
Radius
Standard
Available Lengths
  (in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) (ft.)
APHP-0125-0250 .125 .3.18 .063 1.60 .250 6.35 .375 9.5 50
APHP-0250-0375 .250 6.35 .063 1.60 .375 9.52 1 25 50
APHP-0375-0625 .375 9.52 .125 3.18 .625 15.88 1.2 30 50
APHP-0500-0750 .500 12.70 .125 3.18 .750 19.05 1.8 46 50
APHP-0750-1000 .750 19.05 .125 3.18 1.000 25.40 2.1 53 50
APHP-1000-1375 1.000 25.40 .188 4.77 1.375 34.93 4.1 104 50

 

APHP - HIGH PRESSURE SILICONE TUBING Performance Specifications
Product
Number
Burst Pressure
Non-Treated
Recommended
Working Pressure
based on 3:1
safety factor
Non-Treated
Burst Pressure
Gamma Irradiated
45kGy
Recommended
Working Pressure
based on 3:1
safety factor
Gamma Irradiated
45kGy
Vacuum
Capability
  (psi) (bar) (psi) (bar) (psi) (bar) (psi) (bar) (in./Hg)
APHP-0125-0250 CF CF CF CF CF CF CF CF >29.5
APHP-0250-0375 125 8.6 42 2.9 144 9.9 48 3.3 >29.5
APHP-0375-0625 177 12.2 59 4.1 211 14.5 70 4.8 >29.5
APHP-0500-0750 140 9.7 47 3.2 157 10.8 52 3.6 >29.5
APHP-0750-1000 109 7.5 36 2.5 123 8.5 41 2.8 >29.5
APHP-1000-1375 115 7.9 38 2.6 131 9 44 3 >29.5

 

Sold by standard coil length of 50 ft. Add length suffix code "L" to product number when ordering. Example: 50 ft. of .250 in. I.D. x .375 in. O.D. tubing is product number APHP-0250-0375L.

Non-listed sizes and custom lengths available by special order.

Coils are supplied double bagged in heat-sealed polybags and bulk packed.

Contact your AdvantaPure Sales Representative regarding any special product or packaging needs.

Recommended working pressures are calculated from burst testing using a 3:1 safety factor. Testing was performed at ambient temperature. Application testing is recommended.

CF = Consult factory

NOTE: The data listed throughout this web site is meant only as a guide to aid in design, and is believed to be reliable; however, nothing stated shall constitute a guarantee or warranty for any application. Product field-testing should be performed to find the actual values for a specific application.